Where the electricity goes in a Singapore home
By the Panda Smart Home teamUpdated 4 min read
In most Singapore homes the aircon uses the most electricity. How to measure what actually runs, which automations help, and what to check on an energy label.
On this page
In a Singapore home the aircon is usually the biggest single use of electricity, and it is also the hardest to judge by feel. You see one number at the end of the month, but not which unit ran, when, or why. Measuring first and then automating is a calmer way to cut waste than guessing.
Step 1: find out what is actually running
You cannot change what you cannot see. There are three levels of measurement, from simple to thorough.
- A smart plug with power measurement shows what one plug-in appliance uses. It suits a fridge, a dehumidifier or a fan, but not a ceiling-mounted aircon, which is wired in.
- A power meter on a circuit shows what a particular circuit draws, such as one aircon. Installing it inside the distribution board is electrical work for a licensed electrician.
- A whole-home meter shows the total through the day. Seeing the total beside the aircon lets you tell how much of the load is cooling.
Start with the question you want answered. Often a few days of data on the aircon circuits is enough.
- 1
Measure
See which unit runs, and when
- 2
Rule
Switch off when the room is empty or a window is open
- 3
Feedback
Check the data after a week or two, then adjust
Step 2: look for the common patterns
When people see their numbers for the first time, the same things tend to appear.
- An aircon that runs in an empty room, usually because someone forgot or left a window open.
- A unit that runs all night at the same setting when the room has already cooled.
- Standby loads from TVs, set-top boxes and chargers that add up while no one is using them.
- A single appliance that uses far more than you expected.
Step 3: add automations that match how you live
Automations only help if they fit the household. Some that are worth considering:
- Switch off when the room is empty or a window is open, using a presence or door and window sensor.
- Ease the setting once you are asleep, or switch off at a set time.
- Cool the room shortly before you arrive, not hours earlier.
- Remind you when the aircon has been on for a long time with no one in the room.
We do not promise a particular saving. What you save depends on the home, the unit and the habits, which is why measuring first matters. See smart aircon control for how the units connect.
Check the energy label when you buy
Singapore's National Environment Agency runs a mandatory energy labelling scheme for several household appliances, including air-conditioners, and you will see a tick rating on the label. The ratings have been tightened over time, so compare units on the current label rather than from memory. The tick rating describes efficiency under test conditions. It is a useful way to compare models, but it does not tell you what your own bill will be. Check the NEA website for the current rules.
Where a smart home fits
A system that watches the whole house can put the aircon, the sensors and the meter in one place. It can switch things off, alert you and show the pattern over weeks. Our approach is to keep automations running on a controller in your home, so they keep working when the internet is down. See energy monitoring and safety sensors.
Common questions
How do I know which aircon uses the most electricity?
Measure each unit's circuit, or use a power-measuring device where the aircon plugs in. Without measurement it is hard to tell, because the same unit can use very different amounts depending on how it is used.
Do I need an electrician to monitor power?
For plug-in appliances, no. A smart plug is enough. For a circuit or the whole home, the meter goes in the distribution board, which is work for a licensed electrician.
Will a smart aircon controller lower my bill?
It can help where waste comes from forgetting or leaving a window open. It does not change how much a unit uses when it is running. The result depends on your habits.
Does the tick rating predict my bill?
Not directly. It compares efficiency under test conditions, which helps when choosing between models, but your bill also depends on room size, how often you use it and the setting.
A simple way to start
Pick the room where the aircon runs most and measure it for a week. Then decide what, if anything, you want to automate.
Curious where your electricity goes? Tell us about your home and we will suggest what to measure.
Unfamiliar term? See the smart home glossary.